Philips SHB6017/28 Bluetooth Headset User Manual


 
9
English
EN
6 Frequently asked
questions
Bluetooth headset does not switch on.
Battery is low.
Charge the headset. »
No connection to a mobile phone.
Bluetooth disabled.
Enable the Bluetooth feature on your mobile phone and »
turn on the mobile phone before you turn on the headset.
Pairing does not work.
The headset is not in pairing mode.
Follow the steps described in this user manual. »
Ensure that you see the LED light ashes red and blue »
alternately before you release the
button. Do not stop
pressing the button after seeing the blue LED only.
The mobile phone cannot nd the headset.
The headset may be connected to another previously paired
device.
Turn the currently connected device off or move it out of »
range.
Pairings may have been reset or headset has been previously
paired with other device.
Pair the headset with the mobile phone again as described in »
the user manual.
Voice dialing or redialing does not work.
Your mobile phone may not support this feature.
The other side cannot hear me, and I hear a beep noise every
couple of seconds.
The microphone is muted.
Quickly press »
twice to enable the microphone.
Audio quality is poor and crackling noises can be heard.
Bluetooth audio source is out of range.
Reduce the distance between the headset and the Bluetooth »
audio source, or remove obstacles between them.
The earbud is not positioned correctly.
Ensure that you position the earbud as described in this user »
manual and adjust the ear hook to the best t of your ears.
I hear but cannot control the music on my device (e.g. skip
forward/backward).
Bluetooth audio source does not support AVRCP.
Check the user manual of your audio source. »
Please visit www.philips.com/welcome for additional support.