Philips SE565 Cordless Telephone User Manual


  Open as PDF
of 2
 
What’s in the box
Handset*
Base station with bracket
for SE560
Line cord* Power adapter**
Guarantee, user manual and
quick start guide
OR
SE565
Note
* In multi-handset packs, there are additional
handsets, chargers and power adapters.
** In some countries, you have to connect the line
adapter to the line cord, then plug the line cord
to the telephone socket.
Caution
Use only the supplied •
batteries and power
adapter.
1
2
Connect
Connect the base station
Install
Install the handset
1 The batteries are pre-installed in the handset. Pull the battery tape off from the
battery door before charging.
2 Place the handset on the base station to power up.
Note:
Charge the batteries for 16 hours before rst use.
For more information on the battery icon status, see the User Manual.
3
Enjoy
Make a call
1 Press and dial the phone number; or
2 Dial the phone number and press to dial out the call.
Congure your phone (if necessary)
1 When you see the welcome message, press [OK], select your country, press
[SELECT] to conrm.
The country setting is saved.
»
2 Set the date and time.
The phone is now ready to use.
»
Answer a call
When the phone rings, press or to answer the call.
End a call
Press .
Adjust the earpiece volume
Press or to adjust the volume during a call.
The adjusted volume level is shown on the screen.
»
Set the handset’s ringtone
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET TONES] > [RING TONES],
then press [SELECT] to conrm.
3 Select a ringtone, then press [SELECT] to conrm.
The setting is saved.
»
Add a record
1 Press menu.
2 Select [PHONEBOOK] > [NEW ENTRY], then press [SELECT] to con-
rm.
3 Enter the name then press [OK] to conrm.
4 Enter the number, then press [SAVE] to conrm.
Connect the output plug of the power
1
socket to the bottom of the base
station:
Connect the power socket to a
2
standard wall outlet.
Connect the telephone line cord to the
3
phone socket at the bottom of the base
station and the wall phone socket
Telephone
socket
Power
adapter
Power
socket
3
1
2
Telephone
base
station
Check the battery level
When the handset is off the base station/
charger, the icon indicates the battery
level:
Full (steady on)
Medium (ashing)
Low (empty)
When you see the empty battery icon and
hear an alert tone from the handset, the
battery level is low and needs recharging.
When the handset is on the base
station/charger, the battery icon keeps
ashing until charging completes.
When the charging completes, the
battery icon keeps steady on.
QSG_SE565_05_EN.indd 2-4 9/11/2010 17:03:41
 previous