Filter
Top Products
CONTENTS
Clip
1
INSTALLING TELEPHONE AND BASE STATION
2
1. CONTENTS
2. INSTALLING TELEPHONE AND BASE STATION
• Location of the base station
• Inserting/Replacing batteries
• Telephone connection
• Charging/Recharging the telephone
• Telephone range
• Installing another KALA 200 handset
3. PRESENTATION OF TELEPHONE AND ACCESSORIES
4. THE DISPLAY
• Programming icons
• Icons for common functions
5. USING THE TELEPHONE
• Calling directly/Hanging up
• Taking a call
• Placing a call on hold/Transferring a call
• Earpiece volume adjustment
6. USING THE PHONEBOOKS
• Storing your phone numbers
• Consulting a phonebook
• Calling from a phonebook
• Changing a phonebook entry
• Deleting an entry from the phonebook
• Selecting the ringer type
7. THE LIST OF REDIAL NUMBERS AND INCOMING CALL LOG
• List of numbers to redial
• Incoming call log
8. HOW TO PROGRAM YOUR PHONE
• Example: selecting and navigating
9. PROGRAMMING OPTIONS
• Melody programming options
• Registration of the handset with another base station
• Settings programming option
• Caller identification service
• Other indirect programming options
10. TROUBLESHOOTING
11. YOUR PHILIPS WARRANTY
12. DECLARATION OF CONFORMITY
13. ENVIRONMENT AND SECURITY
Kala 200
(
TD6131
)
Location of the base station
In order to reduce the risk of interference, place the base station at least 1m away from any other
electrical appliance (telephone, television, computer, etc.)
The base station should be placed on a flat surface.
The base station should not be kept in a damp room, near a heat source or close to obstacles such
as thick walls or metallic structures.
Inserting/Replacing batteries
Your handset is powered by two rechargeable AA/R6 batteries.
Only
AA 600 mAh rechargeable
batteries should be used as replacements.
Never use non rechargeable batteries.
1. Slide down the cover 2. Insert batteries following the diagram.
on the back of the telephone.
3. Close the cover.
Telephone connection
On the bottom of the base station:
1
. Connect the power supply (B) into the base station then
plug the power adaptor into the easily accessible wall
socket.
2. Connect the telephone cord (A) to the base station and
then to the PTT wall socket.
Place the handset on the base station (charging unit).
Charging/Recharging the telephone
While the batteries are being charged, flashes on the screen and shows .
When the battery icon on the display shows , the batteries are fully charged.
You will hear a validation beep when you place the handset on the base station.
On first use or when new batteries have been inserted, charge the batteries for at least 24 hours.
You will hear a beep when you activate the telephone if the batteries need to be charged.
Telephone range
Your telephone has a range of : 50m indoors - 350m outdoors.
The symbol on the display indicates that the handset is connected on the base station.
Installing another KALA 200 handset
You can register up to 4 handsets with your base station (See Page 9 Programming options).
Additional handsets do not require additional telephone connections but do need a power
supply adaptor. The reference of Additional Kala 200 handsets is TD 6830.
AB
1
2
+
-
+
-
PRESENTATION OF TELEPHONE AND ACCESSORIES
3
moves to the left, or displays the previous entry.
moves to the right, or displays the following entry.
validates the entry.
press: removes a character during entry. press and hold:
exit any mode (programming, phonebooks or lists).
Modes:
list of last incoming calls.
list of last numbers dialled (redial key).
program the telephone.
Mains adapter
User guide
Programming
key
Redial
list key
Incoming
call log
key
Earpiece
The batteries contain Cadmium and must be disposed of in compliance with the waste dis-
posal regulations. Never use non-rechargeable batteries.
The manufacturer assumes no responsibility for non-respect of these regulations.
The crossed-out dustbin signifies that the battery should not be disposed of with gener-
al household waste.
+
-
+
-
Batteries
Family
phonebook
key
Friends
phonebook
key
Talk key
To make
an external call,
end an external
call, and answer
an external call.
To call all internal
handsets recognised
by the base station or
put a call on hold
(with hold music).
(“internal call” key).
Earpiece
volume
adjustment
How to optimise batteries lifespan
If you plan not to use your phone for at least 15 days, we would suggest you to
remove the batteries from the handset if you disconnect the mains power.
The handset may also be placed
on the base station with the key-
pad face-up.
The key located
on the base sta-
tion side can be
used to make all
handsets ring at
the same time
.
Only use the power and telephone cables
supplied with the telephone.
Telephone cable
Functions keys:
When using your telphone,
3 beep types will
be heard:
• the error beep ,
• the validation beep ,
• the invitation beep .
Beep indicators
A
B