Filter
Top Products
3
EN
Connect
Connect the base station
Install
Insert batteries and charge
1
1. Place the base station in a central location near the telephone line socket and electricity sockets.
2. Connect the supplied splitter to the connector at the back of the base station and then plug the line
cord and the power cable into the respective line jacks on the splitter.
3. Connect the other end of the line cord to the telephone line socket and the other end of the power
cable to the electricity socket.
Power supply
Line cord
Splitter
2
Set date and time
1. Press mMENU.
2. Scroll
: to Clock & Alarm and press mSELECT.
3. Press
mSELECT to enter Set Date/Time.
4. Enter current time (HH:MM) and current date (DD/MM/YY) and press
mOK.
Now, you are ready to use your phone.
2. Place the batteries as indicated
and replace the cover
3. Charge handset for 24 hours 1. Use the coin or screwdriver
to unlock the battery cover.
anticlockwise
ID937_QSG_EN.fm Page 3 Thursday, December 21, 2006 12:24 PM