Filter
Top Products
41EN
Access the answering machine
remotely
1 Make a call to your home number with a
touch tone phone.
2 Enter # when you hear the
announcement.
3 Enter your PIN code.
» You now have access to your
answering machine, and you can now
listen to the new messages.
Note
•
You have 2 chances to enter the correct PIN
code before your phone hangs up.
4 Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Note
•
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat the current or listen to the
previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine on.
(not available when you listen to the
messages).
8 Stop listening to the message.
9 Switch the answering machine off.
(not available when you listen to the
messages).
Behavior of the LED display on the base
station
The table below shows you the current status
with different LED display behavior on the
base station.
LED
display
Answering
machine
status
Message status
No
display
Off --
On No message
On Steady on: message full
with 3 new messages
On Flashing: memory full
On Scrolling when recording
the incoming message or
announcement.
On Displays the volume
level.
On Flashing: remote access/
listen to messages from
the handset
English