Philips CD480 Cordless Telephone User Manual


 
31EN
Set the dial mode
1 Select [Menu] > > [Dial mode], then
press [OK] to conrm.
2 Select a dial mode, then press [OK] to
conrm.
» The setting is saved.
Note
If your phone is in pulse dial mode, press *
during a call for temporary tone mode. Digits
entered for this call are then sent out as tone
signals.
First ring
If you have subscribed to the caller ID service
with your service provider, your phone can
suppress the rst ring before the caller ID
displays on the screen. After the phone is
reset, it can detect automatically if the caller ID
service is subscribed and start to suppress the
rst ring. You can change this setting to suit your
preference. This feature only applies to models
with rst ring support.
Turn the rst ring on/off
1 Select [Menu] > > [First ring], then
press [OK] to conrm.
2 Select [On]/[Off], press [OK] to conrm.
» The setting is saved.
Note
To reset the rst ring status, go to the reset
menu.
Auto clock
Note
This service is network dependent.
Note
Ensure you have the caller ID service before you
have this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, ensure the current year is set.
Set the Auto clock on/off
1 Select [Menu] > > [Auto clock], then
press [OK] to conrm.
2 Select [On]/[Off], press [OK] to conrm.
» The setting is saved.
Note
To reset the rst ring status, go to the reset
menu.
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
English