Filter
Top Products
What’s in the box
Handset
Base station with
bracket for CD360
OR
CD365
User manual
Power supply
Belt clip
Guarantee
Line cord*
Quick Start Guide
Note
Caution
In some countries, you have to connect the line adaptor to the line cord, then •
plug the line cord to the line socket.
In multi-handset packs, there are additional handsets and chargers with power
•
supply units.
Use only the supplied batteries and adaptor
•
1
3
2
Connect
Enjoy
Install
Connect the base station
Install the handset
1 Connect the output plug of the power socket to the bottom of the base station.
2 Connect the power socket to a standard wall outlet.
3 Connect the telephone line cord to the phone socket at the bottom of the base
station and the wall phone socket.
1 Press
flash
TA L
K
and dial the phone number; or
2 Dial the phone number and press
flash
TA L
K
to dial out the call.
1 Press
Ph.Boo
k
to access the phonebook.
2 Select a contact in the phonebook list.
3 Press
flash
TA LK
to make the call.
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET TONES] > [RING TONES],
then press [OK] to confirm.
3 Select a ringtone, then press [OK] to confirm.
The setting is saved. »
1 Press menu.
2 Select [PHONEBOOK] > [NEW ENTRY], then press [OK]
to confirm.
3 Enter the name then press [OK] to confirm.
4 Enter the number, then press [OK] to confirm.
When the phone rings, press
flash
TA L
K
or to answer the call.
Press
exit
END
.
Press
call ID
or
Ph.Boo
k
to adjust the volume during a call.
1 The batteries are pre-installed in the handset. Pull the battery tape off from
the battery door before charging.
2 Place the handset on the base station to power up.
CD365
Make a call
Call from the phonebook
Set the handset’s ringtone
Add a record
Answer a call
End a call
Adjust the earpiece volume
Note:
Charge the batteries for 24 hours before first use.
For more information on the battery icon status, see the User Manual.