Filter
Top Products
25EN
available options varies with different countries.
For details, consult your service provider.
1 Press MENU/OK.
2 Select [Services] > [Recall time], then
press MENU/OK to conrm.
3 Select an option, then press MENU/OK to
conrm.
» The setting is saved.
Dial mode
Note
• This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1 Press MENU/OK.
2 Select [Services] > [Dial mode], then
press MENU/OK to conrm.
3 Select a dial mode, then press MENU/OK
to conrm.
» The setting is saved.
Note
• If your phone is in pulse dial mode, press * during a call
for temporary tone mode. Digits entered for this call
are then sent out as tone signals.
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
1 Press MENU/OK on the handset.
2 Select [Services] > [Register], then press
MENU/OK to conrm.
3 Enter the system PIN. Press REDIAL/C
to make corrections. Press MENU/OK to
conrm the PIN.
4 Press and hold on the base station for
5 seconds.
Note
• For models with an answering machine, you hear a
conrmation beep.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
• If the PIN is incorrect or no base is found within a
certain period, your handset displays a notication
message. Repeat the above procedure if registration
fails.
Note
• The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1 If two handsets share the same base
station, you can unregister a handset with
another handset.
2 Press MENU/OK.
3 Select [Services] > [Unregister], then
press MENU/OK to conrm.
4 Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
5 Select the handset number to be
unregistered.
6 Press MENU/OK to conrm.
» The handset is unregistered.