Philips CD175 Telephone User Manual


 
12
3 Connect each end of the line cord to:
the telephone socket at the bottom of •
the base station;
the telephone socket on the wall.•
Install the handset
Caution
Risk of explosion! Keep batteries away from
heat,sunshineorre.Neverdiscardbatteries
inre.
Use only the supplied batteries.
Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
Chargethebatteriesfor16hoursbeforerst
use.
Warning
Check the battery polarity when inserting in
the battery compartment. Incorrect polarity
may damage the product.
3 Get started
Caution
Ensure you have read the safety instructions in
the “Important” section before you connect
and install your handset.
Connect the base station and
charger
Warning
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the phone.
Use only the supplied power adapter to charge
the batteries.
Note
If you subscribe to the digital subscriber line
(DSL) high speed internet service through
your telephone line, ensure you install a DSL
lterbetweenthetelephonelinecordand
thepowersocket..Thelterpreventsnoise
and caller ID problems caused by the DSL
interference. For more information on the DSL
lters,contactyourDSLserviceprovider.
The type plate is located on the bottom of the
base station.
1 Connect each end of the power adapter
to:
the DC input jack at the bottom of the •
base station;
the power socket on the wall.•
2 Connect each end of the power adapter
to (for multi handset packs):
the DC input jack at the bottom of the •
extra handset charger.
the power socket on the wall.•
EN
IFU_CD170-175_05_EN.indd 12 2009-12-17 17:30:36