Philips CD175 Cordless Telephone User Manual


  Open as PDF
of 40
 
17
Transfer a call
1
Press INT during a call.
2 Select a handset number, then press OK
toconrm.
3 Press when the other side answers
your call.
The call is now transferred to the »
selected handset.
Make a conference call
A 3-way conference call is a call between you,
another handset user and the outside callers. It re-
quires two handsets to share the same base station.
During an external call
1 Press INT to initiate an internal call.
The handsets available for intercom are »
displayed.
The external caller is put on hold. »
2 Select a handset number, then press OK
toconrm.
The selected handset rings. »
3 Press on the selected handset.
The intercom is established. »
4 Press and hold INT on your handset.
You are now on a 3-way conference »
call with the external call and the
selected handset.
5 Press to end the conference call.
During the conference call
1 Press INT to put the external call on hold
and go back to the internal call.
The external call is put on hold. »
2 Press INT to toggle between the external
and internal call.
3 Press and hold INT to establish the
conference call again.
Note
If a handset hangs up during the conference •
call, the other handset remains connected to
the external call.
5 Intercom and
conference calls
An intercom call is a call to another handset
that shares the same base station. A conference
call involves a conversation among you, another
handset user and the outside callers.
Make a call to another handset
Note
If the base station only has 2 registered •
handsets, press INT to make a call to another
handset.
1 Press INT.
The handsets available for intercom are »
displayed.
2 Select a handset number, then press OK
toconrm.
The selected handset rings. »
3 Press on the selected handset.
The intercom is established. »
4 Press to cancel or end the intercom
call.
Note
If the selected handset is occupied in a call, you •
hear a busy tone.
While you are on the phone
You can go from one handset to another
during a call:
1 Press INT.
2 The current caller is put on hold.
3 Select a handset number, then press OK
toconrm.
Wait for the other side to answer your call. »
Toggle between calls
Press INT to switch between the outside call
and the intercom call.
English
EN
IFU_CD170-175_05_EN.indd 17 2009-12-17 17:30:39
 previous next