Filter
Top Products
“
13
Preparation
Selecting the Dialing Mode
You can select the dialing mode by programming. If you have touch tone
service, set to “TONE”. If rotary or pulse service is used, set to “PULSE”.
Your phone comes from the factory set to “TONE”.
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
1
Press (FUNCTION/EXIT).
2
Press (_) or (^) repeatedly until “SET
DIAL MODE ?” is displayed.
3
Press (fl) OK/EDIT.
4
Press (_) or (^) to select “TONE” or
“PULSE”.
5
Press (fl) OK/EDIT (SAVE key).
≥A beep sounds.
≥The display will return to step 2. To return
to the standby mode, press
(FUNCTION/EXIT) or wait for
60 seconds.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT).
11:50
AM
11
/
24
SAVE AUTO# ?
11:50
AM
11
/
24
SET DIAL MODE ?
11:50
AM
11
/
24
TONE
1
=SAVE
PQQX12879ZA-BM02 01.3.7 3:51 PM y[W 13