Panasonic WX-CH2050A Wireless Office Headset User Manual


 
12
Communications with Customers
[TALK]
Any store personnel wearing the headset can communicate
bidirectionally with any customer who is at the menu board.
1. Select a proper sound level by pressing the button or
.
2. You will hear a tone in the headset when a vehicle
arrives at the menu board.
Note: The tone duration varies depending on the set-
tings made in the center module.
<When the talk-lock mode is preset>
1. Press the button T and speak to the customer.
A short beep is heard in the headset.
2. Press the button again. The lock will be released, and
your voice will not be heard by the customer.
<When the press-to-talk mode is preset>
1. Hold down the button T and speak to the customer.
A short beep is heard in the headset.
2. Release the button. Your voice will not be heard by the
customer.
Communications with Other Store
Personnel [PAGE]
Store personnel wearing the headset can communicate
with each other without being heard by customers.
<When the page-lock mode is preset>
1. Press the button P and speak into the microphone at a
normal level.
A short beep is heard in the headset to notify all store
personnel that the system operates in the page mode.
2. Press the button P again. The lock will be released, and
your voice will not be heard by the customer.
<When the press-to-talk mode is preset>
1. Hold down the button P and speak into the microphone
at a normal level.
A short beep is heard in the headset to notify all store
personnel that the system operates in the page mode.
2. Release the button. Your voice will not be heard by the
customer.
VOL
Press
Press again
Hold down
Release
Press
Press again
Hold down
Release