Filter
Top Products
20
Browser Operation
[DSP]
This section displays the settings for the three functions
involved in voice signal processing (echo canceller, digital
noise reduction and ASLC).
Echo Canceller: Displays the echo suppression level. (OFF/
LOW/MID/HIGH)
Digital noise reduction:
Displays the noise suppression level. (OFF/
LOW/MID/HIGH)
ASLC: Displays whether or not Auto Speaker
Level Control is being used.
[V/Det camera]
Images from Network Cameras can be displayed on the
Center Module LCD display in tandem with the vehicle
detector. Select the Network Camera(s) to be displayed on
the LCD display.
OFF: The Network Camera(s) are not coupled to
the vehicle detector.
Camera 1/2/3/4: When the vehicle detector is ON, the
Network Cameras are displayed on the
LCD display in tandem with the vehicle
detector.
Default setting: OFF
Be sure to set a camera that is connected in advance
when outputting the NW camera image. To set a
camera that is connected, click the [Installation] button
in the Setup menu panel, then the [Camera] tab.
Note
Confirming message settings
This section is used to confirm the settings for each type of
message and the schedule for messages.
To display this screen, click the [Message] button in the
Setup menu panel.
Confirming greeter message settings
[Greeter message]
This tab is used to confirm the settings of the greeter
message played when the vehicle detector is ON. This
setting can be changed through operations on the Center
Module. Click the [Message] button, then the [Greeter
message] tab.
[ON/OFF]
Displays whether or not greeter message is being used.
OFF: The greeter message is not played back.
ON: The greeter message is played back.
[Volume (0 - 20)]
Displays the volume of the greeter message.
The volume range is from 0 to 20.
[Delay time (0 - 10s)]
Displays the time delay before playing the greeter message
when the vehicle detector is ON. The range is 0 to 10
seconds.
[Destination]
Displays broadcast destinations other than the order post
speaker from which the greeter message will be played.
All headsets
OFF: The greeter message is not broadcast to any All-In-
One Headset or Belt Pack.
ON: The greeter message is broadcast to all All-In-One
Headsets or Belt Packs.
AUX speaker
OFF: The greeter message is not broadcast to the
kitchen speaker.
ON: The greeter message is broadcast to the kitchen
speaker.
WX-CC411_PGQP1741ZA_BG_en.indd 20 2014/01/17 15:17:41