Filter
Top Products
– 3 –
The handset display shows the instructions as shown
on the right.
1
Base unit:
Press HANDSET LOCATOR
(ALL) until the
CHARGE indicator flashes.
2
Handset:
#Press
á.
$Wait until a long beep sounds and the display
shows the registered number. The registration
will be then complete.
•The registered number “[1]” to “[3]” is shown on the top right of
the display.
•
You can stop registration by pressing (OFF) on the handset and
pressing HANDSET LOCATOR (ALL) on the base unit.
•After you register the handset to the base unit, please confirm that the other (first one and
second one) pre-registered handsets display “Talk” by pressing . If one of the
handsets does not display “Talk”, re-register that handset to the base unit.
Ex. Extension number 3
Registration!
This cordless handset must be registered at the KX-TG2352W/KX-TG2382B
base unit. The handset will be assigned the extension number at registration.
Only one handset can be registered at a time.
Make sure the base unit and the other handsets are not being used.
Registration must be completed within 1 minute.
á
•The illustration of the base unit is the KX-TG2352W.
To cancel the handset registration, please see the KX-TG2352W/KX-TG2382B
Operating Instructions.
For assistance, please call: 1-800-211-PANA(7262)
CHARGE Indicator
Press [ALL] on
base for 3 sec,
then press [
H
].
Handset
Registering
Handset [3]
Registered
[3]
HANDSET LOCATOR (ALL)