Filter
Top Products
Intercom Features
30 For assistance, please visit http://www.panasonic.com/consumersupport
Intercom
Intercom calls can be made between a
handset and the base unit, and between 2
handsets.
Call the desired unit by selecting the
extension number, shown in the upper
right of each handset’s display. The base
unit’s extension number is 0.
LTo confirm the handset’s extension
number ([1] or [2]), place the handset
on the base unit or charger.
LThe base unit will display the paging or
paged handset number (H1 or H2).
Note:
LIf you have difficulty hearing the other
party while using the speaker, decrease
the speaker volume.
LIf you receive a phone call while talking
on the intercom, you will hear 2 tones
(page 36). To answer the call, press
{OFF}, then press {C} or {s}.
LYou cannot change the ringer tone for
intercom calls.
From the handset to the base unit
1 Handset:
Press {INTERCOM}, then press {0}.
LYou can also select the base unit by
pressing {V} or {^} then pressing
{>}.
LThe base unit will ring for 1 minute.
LTo stop paging, press {OFF}.
2 Base unit:
Press either {LOCATOR/INTERCOM
1} or {LOCATOR/INTERCOM 2} to
answer the page.
3 Handset:
When finished talking, press {OFF} or
place the handset on the charger.
Note:
LDuring an intercom call, the handset
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
LTo adjust the base unit’s speaker
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
From the base unit to a handset
1 Base unit:
Press {LOCATOR/INTERCOM 1} or
{LOCATOR/INTERCOM 2}.
LThe handset will beep for 1 minute.
LTo stop paging, press either
{LOCATOR/INTERCOM 1} or
{LOCATOR/INTERCOM 2}.
2 Handset:
Press {C}, {s}, or {INTERCOM} to
answer the page.
3 Base unit:
When the paged party answers, speak
into the MIC.
4 Base unit:
When finished talking, press either
{LOCATOR/INTERCOM 1} or
{LOCATOR/INTERCOM 2}.
Note:
LYou can locate a misplaced handset by
paging it. (Handset locator)
From one handset to the other handset
Example: When handset 1 calls handset 2.
1 Handset 1:
Press {INTERCOM}, then press the
other handset number {2}.
LYou can also select the handset by
pressing {V} or {^} then pressing
{>}.
LThe paged handset will beep for 1
minute.
LTo stop paging, press {OFF}.
TG5436(e).book Page 30 Friday, March 25, 2005 5:40 PM