Filter
Top Products
30
One-Touch Dialer
You can store a phone number in the (DIRECT) button of the handset. The
stored number is dialed with a one-touch operation.
Storing a Phone Number in the DIRECT Button
Make sure the handset is in the standby mode initially.
1
Press (FUNCTION/EXIT/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT á (Yes key).
4
While the arrow points to “Save
DIRECT#”, press FWD/EDIT á (Yes key).
5
Enter a phone number, up to 22 digits.
•Each time you press (CLEAR) the digit to the
left of the cursor is erased. To erase all digits,
press and hold (CLEAR).
•To move the cursor, press BACK Ü or
FWD/EDIT á.
6
Press Ö (Next key).
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
7
Press FWD/EDIT á (Save key).
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 44).
IH G
=Next
H
Save DIRECT#
Set flash time
GF H
=Yes
1234567890123456
789012
F
=Edit
H
=Save
1234567890123456
789012
Save DIRECT#
1234567890123456
789012
IH G
=Next