Filter
Top Products
24
To adjust the receiver volume (HIGH, MEDIUM or LOW)
or speaker volume (6 levels) while talking
To increase, press Ñ.
To decrease, press Ö.
•The display will return to the length of the call.
While using
•Each time you press Ö or Ñ, the volume
level will change among 3 levels (HIGH,
MEDIUM or LOW). Your phone comes from
the factory set to level MEDIUM.
While using
•Each time you press Ö or Ñ, the volume
level will change among 6 levels. Your phone
comes from the factory set to level 3.
•When you replace the battery, the selected receiver/speaker volume setting will
return to the factory set. Reprogram if necessary.
HIGH
MEDIUM
LOW
Ñ
Ñ
Ö
Ö
Ex. Speaker volume:
level 6
Loud
Low ❚❚❚❚❚❚ High
Loud
Low ❚❚❚❚❚❚ High
Loud
Low ❚❚❚❚❚❚ High
Loud
Low ❚❚❚❚❚❚ High
To put a call on hold
Press (HOLD/INTERCOM/CLEAR).
•“Line on hold” is displayed.
•If you put a call on hold for more than 6 minutes,
an alarm tone will sound. The call will be disconnected
after a total of 10 minutes.
To release the hold
From the handset, lift the handset, or press or .
From the base unit, press (SP-PHONE).
•If another phone is connected on the same line (p. 60), you can also release the
hold by lifting its handset.
Line on hold
00-00-08
Making Calls