Preparation
28
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
IP/TEL line selection
The line selection mode determines the
line selected when you press {s} to
make a call.
– “IP”: IP line is selected.
– “TEL” (default): Landline is selected.
If you dial a A number (page 4)
then press {s} using the handset, the
IP line is automatically selected.
Note:
L You can select a line manually
regardless of the line selection mode
by pressing {TEL} or {IP}.
Handset line selection N
1 {MENU} i {#}{2}{5}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Note:
L When you press {CALL} to make a
call (page 31), the set line is selected.
When you call back from the redial list
or caller list, the line indicated by V
(landline) or j (IP line) is selected
(page 31, 45, 59).
Base unit line selection N
1 {MENU} i {#}{*}{2}{5}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Configuring the Internet
connection settings
If your local network uses a DHCP
(Dynamic Host Configuration Protocol)
server for automatic IP address
assignments, you do not need to change
any settings. If your local network uses a
static IP address, turn the DHCP
connection mode off.
Leaving the DHCP connection mode on
allows the base unit to receive an IP
address automatically from a DHCP
server on your local network.
Automatic setup (default) N
The base unit automatically obtains an
IP address and other Internet connection
settings (subnet mask, default gateway,
and DNS server addresses).
Turning the DHCP connection mode
on:
1 {MENU} i {#}{5}{0}{0}
2 {V}/{^}: “On”
3 {SAVE} i {OFF}
L Wait until the STATUS indicator
on the base unit turns green.
When the STATUS indicator
lights in green, the setting is
complete. Confirm your A
number (page 30).
L When the STATUS indicator on
the base unit does not light in
green even if you wait for a few
minutes, see page 23.
Note:
L To view the Internet connection
settings:
{MENU} i {#}{5}{0}{1} i
When finished, press {OFF}.
Available model:
BB-GT1540
GT15xx.book Page 28 Monday, June 4, 2007 8:52 AM