Filter
Top Products
Getting Started
1
1-A Accessories
To select the dialing mode TONE (preset) or PULSE
You can program the dialing mode using the handset near the base
unit. The TALK indicator light must be off before programming.
(#) twice (PULSE)
Press PROGRAM
á \ AUTO Ü \ OR \
(*) twice (TONE)
\ PROGRAM á.
•To cancel during programming, press PROGRAM
á. Start again
from the beginning.
•If 3 beeps sound during programming, a wrong key was pressed.
Start again from the beginning.
1-C Settings
1-B Location of Controls
Handset
Base unit
AC Adaptor ....................one
Order No. PQLV1Z
Telephone Line Cord
.......................................one
Belt Clip .........................one
Order No. PQKE10127Z1
• For extra orders, call 1-800-332-5368.
•USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z).
•The AC adaptor must remain connected at all times. (It is normal for the
adaptor to feel warm during use.)
•To connect a standard telephone on the same line, see section 6-E.
2
Raise the antennas.
3
Charge the battery
for 6 hours.
•See section 6-A for more
details.
•The IN USE/CHARGE
indicator lights.
1
Connect as shown.
Back Side
Antenna
(1-C)
Antenna
(1-C)
Cradle Lock Switch (1-E)
(HANDSETÒLOCATOR)
Button (5-E)