Filter
Top Products
Page 2 Enterprise Edge M7100 Quick Reference Guide
Making and answering calls
Answering calls
1. When your telephone rings, lift your handset.
You are immediately connected to the call.
Making external calls
Depending upon the dialling mode programmed for your
telephone, you may be able to dial your call before lifting your
handset.
1. Pick up the handset.
2. Dial
‚
(your system’s exchange line access code or a line
pool access code).
3. Dial the external telephone number.
Making internal calls
1. Pick up the handset.
2. Dial the internal number.
Note: Extension numbers and the exchange line access code
are supplied by your System Administrator.
Making or answering a
second call
The M7100 telephone allows you to have two calls active at
the same time.
You can switch between calls using
˙
.
To answer a second call while on another call
1. Press
˙
to put the first call on hold.
The second call automatically comes onto the line.
To hold a call and make a second call
1. Press
˙
to put the first call on hold.
2. Dial the telephone number for the second call.
To return to the first call
1. Press
˙
again to return to the first call on hold.
The second call is automatically put on hold.
˙
To hold a call
1. Press
˙
.
2. Press
˙
again to return to the call on hold.
Check the display for confirmation or additional information.
Note: If you have difficulty selecting a line on your M7100
telephone, ask your System Administrator to check your
telephone's programming. Your telephone must be assigned to
use an exchange line or line pool.