Filter
Top Products
3 Turn the adaptor. Tuck the telephone line cord inside the wall mount adaptor.
Insert the lower tabs of the adaptor into the unit’s bottom slots (A), then insert by
pushing down the levers of the adaptor into the upper slots (B).
1
2
2
1
4 Drive screws (not included) into the wall using the wall template below. Connect
the telephone line cord. Mount the unit, and then slide it down.
Hooks
8.3 cm
Screws
To single-line
telephone jac
k
To temporary set the handset down during a
conversation, place it as shown in this picture.
Wall Template
8.3 cm
19
Useful Information