Filter
Top Products
Error messages
Display message Cause/solution
Base no power
o
r
N
o link. Re-connect base
AC adaptor.
R The handset has lost communication with the base
u
nit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been canceled.
Re-register the handset (page 26).
Busy
R The called unit is in use.
R O
ther units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
Call phone company for
yo
ur access #
R You have not stored the voice mail access number.
S
tore the number (page 34).
Check tel line
R The supplied telephone line cord has not been
c
onnected yet or not connected properly. Check the
connections (page 9).
Error!!
R Recording was too short. Try again.
I
nvalid
R There is no handset registered to the base unit
m
atching the handset number you entered.
R The handset is not registered to the base unit.
Register the handset (page 26).
Requires subscription to
Ca
ller ID.
R You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
Use rechargeable battery.
R A wrong type of battery such as Alkaline or
M
anganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.
36
For assistance, please visit http://www.panasonic.com/help
Useful Information
TGC2xx(en_en)_1209_ver030.pdf 36 2013/12/09 11:46:11