Filter
Top Products
Useful Information
42
For assistance, please visit http://www.panasonic.com/help
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause/solution
Busy
or
System is busy. Please
try again later.
L The called handset or base unit is in use.
L Other units are in use and the system is busy.
Try again later.
L The handset you are using is too far from the
base unit. Move closer and try again.
L The handset’s registration may have been
canceled. Re-register the handset (page 26).
Check tel line L The supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 10).
Don’t use this battery. L A wrong type of batteries such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on page
5, 11.
Error!! L The handset’s registration has failed. Move
the handset and base unit away from all
electrical appliances and try again.
Insert battery L The handset was placed on the base unit or
charger without batteries. Insert the batteries
properly (page 11).
Invalid L There is no handset registered to the base
unit matching the handset number you
entered.
L The handset is not registered to the base unit.
Register the handset (page 26).
No link to base.
Reconnect AC adaptor.
L The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset’s registration may have been
canceled. Re-register the handset (page 26).
Phonebook full L The phonebook memory is full. Erase
unnecessary entries (page 19).
Store VM access# L You have not stored the voice mail access
number. Store the number (page 36).
TG43xx_OI.book Page 42 Tuesday, December 11, 2007 2:04 PM