Filter
Top Products
Useful Information
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 17
Mounting the cordless camera on the wall
Standard mounting
Upside down mounting
L The image may be seen upside down when mounting upside down. To compensate for this,
change the cordless camera setting to display images upside down (page 11).
1 Drive the screws (not included) into the
wall at a recommended height of 1.8 m
or below using the wall mount template
as a guide (page 18).
2 Mount the cordless camera (A), then
slide it down (B) and to the right (C) until
it is secure.
L To aim the camera lens, see page 10.
1 Drive the screws (not included) into the
wall at a recommended height of 1.8 m
or below using the wall mount template
as a guide (page 18).
2 Mount the cordless camera (A), then
slide it down (B) and to the left (C) until
it is secure.
Screws
51 mm
(220–240 V, 50 Hz)
A
B
C
Screws
51 mm
(220–240 V,
50 Hz)
A
B
C
TGA914E(e).book Page 17 Friday, July 28, 2006 12:09 PM