Filter
Top Products
6
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Registering the handset to the KX-TG8200/KX-TG8220 base
unit
Ensure that the handset is switched on. If it is not on, press and hold
{ih}
for
few seconds to turn the handset on.
1
Lift the handset and press
{ih}
. Place the handset on the base unit.
•
Continue the operation even when the handset display shows “
Please
Wait...
”.
2
Proceed with the operation for your model.
3
With the handset still on the base unit, wait until a confirmation tone sounds
and
w
stops flashing.
Note:
•
If an error tone sounds, or if
w
is still flashing, register the handset according
to the base unit’s operating instructions.
•
If all registered handsets start ringing in step 2, press
{x}
to stop. Start again
from step 1.
•
The KX-TG8200 does not feature an answering system.
•
Answering system features are available only when this handset is registered
to the KX-TG8220.
N
KX-TG8200
Press and hold
{x}
on the base unit for
about 5 seconds. (No registration tone)
N
KX-TG8220
Press and hold
{x}
on the base unit for
about 5 seconds, until the registration tone
sounds.
{x}
{x}
TGA820E(e).fm Page 6 Wednesday, May 30, 2007 6:52 PM