Filter
Top Products
Preparation
4 For assistance, please visit http://www.panasonic.com/consumersupport
Battery installation
1 Insert the battery (1), and press it
down until it snaps into the
compartment (2).
2 Close the handset cover.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this battery.
Battery charge
Place the handset on the charger for 6
hours before initial use.
LThe unit will beep once, the CHARGE
indicator will light, and “Charging” will
be displayed.
L“Charge completed” is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Note:
LTo ensure the battery charges properly,
clean the charge contacts of the handset
and charger with a soft, dry cloth once a
month. Clean more often if the unit is
subject to grease, dust, or high humidity.
Recharging the battery
Recharge the battery when:
–“Recharge battery” is displayed or
3 flashes on the handset display.
– the handset beeps intermittently while it
is in use.
Note:
LIf the battery has been discharged, the
handset will display “Charge for 6
HRS” and 4 when you place the
handset on the charger.
1
2
CHARGE
indicator
TGA551(E).book Page 4 Wednesday, April 6, 2005 10:53 AM