Panasonic KX-TGA410B Bluetooth Headset User Manual


 
Problem Cause/solution
I cannot operate the
a
nswering system.
R Someone is using the unit. Wait for the other user
to finish.
R A caller is leaving a message. Wait for the caller to
finish.
R The handset is too far from the base unit. Move
closer.
I cannot operate the
a
nswering system remotely.
R The remote access code is not set. Set the remote
access code (page 60).
R You are entering the wrong remote access code. If
you have forgotten your remote access code,
enter the remote access code setting to check
your current code (page 60).
R Press each key firmly.
R The answering system is turned off. Turn it on
(page 61).
R You cannot operate the answering system when
calling a cellular phone registered to the base unit.
Bluetooth PIN
Problem Cause/solution
I cannot remember the PIN. R C
hange the PIN using the following method.
1 MMENUN#619
2 *7000
3 Enter the new 4-digit PIN. a MOKN
4 Enter the new 4-digit PIN again. a MSAVEN a
MOFFN
Liquid damage
Problem Cause/solution
Liquid or other form of
m
oisture has entered the
handset/base unit.
R Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before
use. If the unit does not work properly, contact an
authorized service center.
Caution:
R T
o avoid permanent damage, do not use a microwave oven to speed up the drying
process.
For assistance, please visit http://www.panasonic.com/help
79
Useful Information