Filter
Top Products
14 For assistance, please visit http://www.panasonic.com/help
3 Enter the desired hour and minute you wish to start this feature.
4 {AM/PM}: Select “AM” or “PM”. i {OK}
5 Enter the desired hour and minute you wish to end this feature.
6 {AM/PM}: Select “AM” or “PM”. i {SAVE} i {OFF}
LWhen the silent mode is set, & is displayed.
NChanging the start and end time
{MENU} i {#}{2}{3}{7} i Continue from step 3.
Voice mail service: Storing the voice mail (VM) access number
Once you have stored your service provider/telephone company’s voice
mail access number, you can dial it automatically to listen to your voice
mail messages. You need to store the voice mail access number to
activate the message alert feature (page 11) for voice mail service.
1 {MENU} i {#}{3}{3}{1}
2 Enter your access number (24 digits max.).
3 {SAVE} i {OFF}
Note:
LWhen storing your voice mail access number and your mailbox
password, press {PAUSE} to add pauses between the access number
and the password as necessary. Contact your service provider/
telephone company for the required pause time.
LTo erase the voice mail access number: Press and hold {CLEAR}
until all digits are erased in step 2. i {SAVE} i {OFF}
Voice mail service: Voice mail (VM) tone detection
Your service provider/telephone company sends special signals
(sometimes called “voice mail tones” or “stutter tones”) to the unit to let
you know you have new voice mail messages after you press {C}.
Soon after you hang up a call or after the phone stops ringing, your unit
checks the phone line to see if new voice mail messages have been
recorded. The default setting is “On”. Turn this feature off when:
– You do not subscribe to voice mail service.
– Your service provider/telephone company does not send voice mail
tones.
– Your phone is connected to a PBX.
TGA401(e).fm Page 14 Tuesday, December 22, 2009 12:10 PM