Filter
Top Products
For assistance, please visit http://www.panasonic.com/help 3
Battery installation
1
Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
2 Insert the battery (A), and press it
down until it snaps into position (B ).
Then close the handset cover (C,
D).
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to
recycle this battery.
Battery charge
Place the handset on the charger for 7
hours before initial use.
Note:
LIf you want to use the handset
immediately, charge the battery for at
least 15 minutes.
LTo ensure that the battery charges
properly, clean the charge contacts of
the handset and charger with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Panasonic battery performance
Note:
LThe handset can be left on the
charger without any ill effect on the
battery.
LThe battery level may not be
displayed correctly after you replace
the battery. In this case, place the
handset on the charger and let charge
for 7 hours.
B
A
C
D
Operation Operating time
While in use
(talking)
Up to 5 hours
While not in use
(standby)
Up to 11 days
While using the
clarity booster
feature
Up to 3 hours
Charge
contacts
TGA300(e).fm Page 3 Tuesday, December 5, 2006 6:58 PM