Filter
Top Products
4 For assistance, please visit http://www.panasonic.com/help
Registering a handset to the base unit
1
Handset:
Lift the handset and press {OFF}.
2 Base unit:
Press and hold {LOCATOR} for about 5 seconds until the registration
tone sounds.
LIf all registered handsets start ringing, press the same button to
stop. Then repeat from step 1.
LThe next step must be completed within 90 seconds.
3 Handset:
Place the handset on the charger.
LContinue the operation even when the handset display shows
“Registering”.
4 With the handset still on the charger, wait until a long beep sounds
and w stops flashing.
Note:
LIf an error tone sounds, or if w is still flashing, register the handset
according to the base unit’s operating instructions.
Display language
1
{MENU} i {#}{1}{1}{0}
2 {V}/{^}: Select the desired setting.
3 Press the middle soft key to save. i {OFF}
TGA106(e).fm Page 4 Monday, January 19, 2009 6:51 PM