Filter
Top Products
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
(middle soft key)
2 Press MCN, MDN, MEN, or MFN to select the desired main menu. a
3 Press MCN or MDN to select the desired item from the next sub-menus. a
4 Press MCN or MDN to select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
N.
n Using the direct command code
1
(middle soft key) a Enter the desired code.
Example: Press
(middle soft key) #101.
2 Select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
N.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu:
“Caller List”
Operation Code
Viewing the caller list. #213 35
Main menu: “Answer System”
Sub-menu 1 Sub-menu 2 Settings Code
Message List
– – #329 39
Play New Msg.
– – #323 38
Play All Msg.
– – #324 38
Erase All Msg.
*1
– – #325 40
Greeting
Start REC
*1
(Record greeting)
– #302 38
Play Greeting
– #303 38
Default
*1
(Reset to pre-recorded
greeting)
– #304 38
24
Programming
TG816xAL(e)_0131_ver001.pdf 24 2012/01/31 20:20:20