Filter
Top Products
Making cellular calls
Available for:
K
X-TG7741 series (page 3)
1 P
ress MCELL 1N or MCELL 2N.
2 Dial the phone number.
3 When the other party answers, speak into
the microphone.
R Speak alternately with the other party.
4 When you finish talking, press
MSP-PHONEN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
With the call sharing mode on (page 29),
press MCELLN on the handset. a MbN:
Select the desired cellular phone. a
MSELECTN a Press MSP-PHONEN on the
base unit.
– When only 1 cellular phone is registered
or the line is set to make cellular calls
(page 20), press MCELLN on the
handset, then press MSP-PHONEN on
the base unit.
If the handset is on the base unit, simply lift
it.
Adjusting the speaker volume
P
ress MjN or MkN repeatedly while talking.
Redialing the last number dialed
1 P
ress MCELL 1N or MCELL 2N.
2 MREDIALN
Making landline calls
1 MS
P-PHONEN
2 Dial the phone number.
3 When the other party answers, speak into
the microphone.
4 W
hen you finish talking, press
MSP-PHONEN.
Note:
R While on a call, you can switch from the
base unit to the handset:
Press M
N
on the handset, then press
MSP-PHONEN on the base unit with the call
sharing mode on (page 29).
If the handset is on the base unit, simply lift
it.
Redialing the last number dialed
MS
P-PHONEN a MREDIALN
Pause (for PBX/long distance service
u
sers)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 32).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 MSP-PHONEN
2 9 a MPAUSEN
3 Dial the phone number.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Answering calls
W
hen a call is being received, the SP-PHONE
indicator flashes rapidly.
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
1 Press MSP-PHONEN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2 Speak into the microphone.
3 When you finish talking, press
MSP-PHONEN.
For assistance, please visit http://www.panasonic.com/help
27
Making/Answering Calls Using the Base Unit
TG7731_41_(en-en)_1121_ver.021.p27 27 2011/11/21 12:02:13