Panasonic KX-TG7533 Telephone User Manual


 
Answering System
34
For assistance, please visit http://www.panasonic.com/help
Listening to messages
using the handset
When new messages have been
recorded:
New message is displayed.
The message indicator on the handset
flashes slowly if the message alert
feature is turned on (page 38).
1 To listen to new messages:
{PLAY}
or
{MENU} i {#}{3}{2}{3}
L If there are no new messages in
the answering system, {PLAY} is
not displayed.
To listen to all messages:
{MENU} i {#}{3}{2}{4}
2 When finished, press {OFF}.
Note:
L To switch to the receiver, press {C}.
Listening to messages from
the message list
You can select the item to play back.
1 {MENU} i {#}{3}{2}{9}
2 {V}/{^}: Select the desired item from
the message list. i {PLAY}
L You can erase the selected
message as follows:
{ERASE} i {V}/{^}: Yes i
{SELECT}
3 When finished, press {OFF}.
Note:
L If the item has already been heard,
Q” is displayed, even if it was heard
using another handset.
L If the unit cannot receive caller
information, Message is displayed
in the message list.
Operating the answering
system
{MENU} i D i {SELECT}
*1 If pressed within the first 5 seconds of
a message, the previous message is
Available for: KX-TGA750 handset
Key Operation
{^} or {V} Adjust the
receiver/speaker
volume (during
playback)
{1} or {<} Repeat message
(during playback)
*1
{2} or {>} Skip message (during
playback)
*2
{3} Enter the
Settings menu
{4} Play new messages
{5} Play all messages
{6} Play greeting
message
{7}{6} Record greeting
message
{8} Turn answering
system on
{PAUSE} Pause message
*3
{9} or
{STOP}
Stop recording
Stop playback
{0} Turn answering
system off
{*}{4}
*4
Erase currently
playing message
{*}{5} Erase all messages
{*}{6} Reset to a pre-
recorded greeting
message
TG7531(e).book Page 34 Monday, December 28, 2009 6:34 PM