Filter
Top Products
Setting the Smart Function Key
The Smart Function Key for the following
features must be “On”.
– “New Message”
*1
(Default: On)
– “Missed Call” (Default: Off)
The settings can be set for each handset.
*1 KX-TG6821 series: page 3
1 M
N#278
2 MbN: Select the desired setting and press
M
N.
R “
” is displayed next to the selected
features.
R To cancel a selected feature, press
M
N again. “ ” disappears.
3 MOKN a MeN
Note:
R If the NR indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.
One touch eco mode
The MR/ECON button on the handset enables
you to activate the eco function with one
touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
– When the one touch eco mode is on: “Low”
is temporarily displayed and
is shown
on the handset display instead of
.
– When the one touch eco mode is off:
“Normal” is temporarily displayed and
goes off from the handset display.
Note:
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
(KX-TG6812)
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to “On”
(page 29):
– One touch eco mode is cancelled.
– “Eco Setup” is not shown in the
display menu (page 24).
14
Getting Started
TG68xxSA(en)_0619_ver011.pdf 14 2013/06/19 17:43:16