Filter
Top Products
Making/Answering Calls
16
For assistance, please visit http://www.panasonic.com/help
Making calls
Using the handset
1
Lift the handset and dial the phone
number.
L To correct a digit, press { CLEAR}.
2 Press {C} or {CALL}.
3 When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Using the speakerphone
1 Dial the phone number and press
{s}.
L Speak alternately with the other
party.
2 When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 {REDIAL} or {>} REDIAL
L If there is a new message in the
voice mail or answering system,
{REDIAL} is not displayed.
2 {V}/{^}: Select the desired phone
number.
3 {C}
Erasing a number in the redial list
1 {REDIAL} or {>} REDIAL
2 {V}/{^}: Select the desired phone
number. i {ERASE}
3 {V}/{^}: “Yes” i {SELECT}
4 {OFF}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 22).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1 {9} i {PAUSE}
2 Dial the phone number. i {C}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Repeat as
needed to create longer pauses.
Using the base unit
1
{SP-PHONE}
2 Dial the phone number.
3 When the other party answers,
speak into the microphone.
L Speak alternately with the other
party.
4 When you finish talking, press {SP-
PHONE}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 16 Thursday, January 21, 2010 1:11 PM