Filter
Top Products
Caller ID Service
30
Storing an area code to be
deleted automatically
In some situations, phone numbers
stored automatically in the caller list
(page 29) will include area codes. If you
do not want to dial the area code when
making calls from the caller list, you can
store the area code which you want the
unit to delete automatically.
Example: You have stored the area
code “123”. If you make a call from the
caller list to the phone number “123-456-
7890”, the unit dials “456-7890”.
1 {MENU} i {#}{2}{5}{5}
2 Enter your area code (5 digits max.).
L To correct a digit, press {3} or
{4} to move the cursor, then
press {CLEAR}. Enter the correct
number.
3 {SAVE} i {OFF}
To erase your area code
1 {MENU} i {#}{2}{5}{5}
2 Press and hold {CLEAR} until all
digits erased. i {SAVE} i
{OFF}
Editing a caller’s phone
number before calling back
You can edit a phone number in the
caller list.
1 {3} CID
2 {V}/{^}: Select the desired entry.
L If D is displayed, not all of the
information is shown. To see the
remaining information, press {4}.
To return to the previous screen,
press {3}.
3 {EDIT} i Add or erase digits to
the beginning of the number as
necessary.
L To add a digit, press the desired
dial key.
L To erase a digit, press {CLEAR}.
4 {C}
Note:
L The edited phone number is not saved
in the caller list.
Erasing selected caller
information
1
{3} CID
2 {V}/{^}: Select the desired entry.
3 {ERASE} i {V}/{^}: “Yes” i
{SELECT} i {OFF}
Erasing all caller information
1
{3} CID
2 {ERASE} i {V}/{^}: “Yes” i
{SELECT} i {OFF}
Storing caller information to
the phonebook
1
{3} CID
2 {V}/{^}: Select the desired entry.
3 {SAVE}
4 {V}/{^}: “Phonebook” i
{SELECT}
5 Continue from step 2, “Editing
entries”, page 18.
TG654xBX(e).book Page 30 Tuesday, June 28, 2011 10:16 AM