Filter
Top Products
Caller ID Service
22
– the caller’s customized name
following every ring, if the caller
information matches a phone
number stored in the handset 1
phonebook. If the handset 1 does
not have a link to the base unit
(battery is empty, for instance), the
other handset(s)
*1
and the base
unit announce the caller’s phone
number.
*1 KX-TG6052/KX-TG6053
LUsually the unit announces the
caller’s information after the 2nd ring.
Depending on your telephone service
provider, the unit may announce the
caller’s information later than usual.
LName pronunciation may vary. This
feature may not pronounce all names
correctly.
LUsually the unit announces the
caller’s information after the 2nd ring.
If you turn on the answering system
and set the ring count to “2” (page
34), the unit does not announce the
caller’s information. If “Toll saver”
is selected and there is a new
message, the unit does not announce
the caller’s information.
LYour unit may mute one or more rings
in order to announce the caller’s
information. Talking Caller ID takes
precedence over ringing.
LThe announcement is heard at the
ringer volume (page 15 , 28).
LThis feature can be turned on or off
(page 28).
LFor users in name display service
available areas:
– The unit announces the Caller ID
name provided by your telephone
service provider.
– The unit announces the customized
phonebook entry name for numbers
stored in the handset 1 phonebook.
– Caller ID service has a limit of how
many characters can be displayed.
If a caller’s name is too long, the
handset may not be able to display
or announce the entire name.
Ringer ID/Light-up ID
This feature can help you identify who is
calling by using different ringers and
ringer indicator colours for different
callers stored in the phonebook. You
can assign a different ringer and
indicator colour to each phonebook
item. When a call is received from a
caller stored in the phonebook, the
assigned ringer rings and the assigned
ringer indicator colour flashes after
Caller ID information is displayed.
If you select “No Ringer ID” (default)
or “No Light-up ID” (default), the
handset uses the ringer tone or ringer
indicator colour you selected on page
27 when a call is received from that
caller.
LThe ringer and indicator colour may
be changed after the 2nd ring.
1 Find the desired item (page 19). i
{Option}
2 To assign a ringer:
{V}/{^}: Select “Ringer ID”. i
{Select}
To assign a ringer indicator colour:
{V}/{^}: Select “Light-up ID”. i
{Select}
3 {V}/{^}: Select the desired setting.
4 {Save} i {OFF}
TG605xAL.book Page 22 Thursday, September 27, 2007 5:49 PM