Filter
Top Products
Useful Information
49
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG5932/KX-TG5933/KX-TG5934
Display message Cause/solution
Busy L The called base unit is in use.
L Another handset or the called handset is in use.
*1
L The handset you tried to copy phonebook items to is in
use.
*1
L The handset you are calling is too far from the base unit.
*1
Error!! L The handset’s registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.
L Another handset user tried to send phonebook items to
you but there was an error. Have the other handset user
re-send the items to you (page 27).
*1
---Incomplete---
Phonebook full
L The destination unit’s phonebook memory is full. Erase
unnecessary items from the destination unit’s phonebook
(page 26).
*1
Invalid L There is no handset registered to the base unit matching
the extension number you entered.
*1
No items stored L Your phonebook or redial list is empty.
No link to base.
Move closer to
base, try again.
L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit’s AC adaptor is plugged in.
L Raise the base unit antennas.
L The handset’s registration may have been cancelled. Re-
register the handset (page 44).
Phonebook full L There is no space to store new items in the phonebook.
Erase unnecessary items (page 26).
Please lift up
and try again.
L A handset button was pressed while the handset was on
the base unit or charger. Lift the handset and press the
button again.
System is busy.
Please try again
later.
L Other units are in use and the system is busy. Try again
later.
*1
L Another user is listening to messages. Try again later.
TG593xAL.book Page 49 Tuesday, April 11, 2006 10:31 AM