Filter
Top Products
Sub-menu 1 Sub-menu 2 Settings Code
Set tel line
Set dial mode
*
1
1: P
ulse
2: <Tone>
#120 16
Set flash time
*
1, *9
0: 9
00 ms
1: <700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
9: 80 ms
#121 19
Set line mode
*
1, *10
1: A 2
: <B> #122 –
Call sharing
*
1
– 1: <O
n> 0: Off #194 20
Registration Register handset
– #130 31
Deregistration
*
2
– #131 31
Change language Display
1: <E
nglish>
2: Español
#110 16
Voice prompt
*
1
1: <E
nglish>
2: Español
#112 16
Main menu: “C
ustomer support”
Operation Code
Displaying customer support Web address. #680 –
*1 If you program these settings using one of the handsets, you do not need to program the
s
ame item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
5). If you select a melody, you cannot distinguish lines by their ringers.
*5 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*6 The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
For assistance, please visit http://www.panasonic.com/help
27
Programming
TG47xx(en-en)_1118_ver022.pdf 27 2011/11/18 10:26:18