Panasonic KX-TG4734B Telephone User Manual


 
R T
he base unit user can take the call by
pressing MSP-PHONEN.
*1
*1 KX-TG4741/KX-TG4761 series: page 3
Base unit
*
1
*1 KX-TG4741/KX-TG4761 series: page 3
1 Press MHOLDN during an outside call.
2 To release hold, press MSP-PHONEN.
R A handset user can take the call by
pressing M
N.
N
ote for handset and base unit:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound and
the ringer indicator on the handset flashes
rapidly. After 1 additional minute on hold,
the call is disconnected.
R If another phone is connected to the same
line, you can also take the call by lifting its
handset.
R While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes.
Mute
W
hile mute is turned on, you can hear the
other party, but the other party cannot hear
you.
Handset
1 P
ress MMUTEN during conversation.
R MMUTEN flashes.
2 To return to the conversation, press
MMUTEN again.
Note:
R MMUTEN is a soft key visible on the handset
display during a call.
Base unit
*
1
*1 KX-TG4741/KX-TG4761 series: page 3
1 Press MMUTEN during conversation.
R The SP-PHONE indicator flashes.
2 To return to the conversation, press
MMUTEN again.
Flash
Handset / Base unit
*
1
*1 KX-TG4741/KX-TG4761 series: page 3
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 27.
For call waiting or Call Waiting
C
aller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed on the
handset that is in use after you hear the call
waiting tone.
Handset / Base unit
*
1
*1 KX-TG4741/KX-TG4761 series: page 3
1 Press MCALL WAITN to answer the 2nd
call.
2 To switch between calls, press MCALL
WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing (for
r
otary/pulse service users)
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
For assistance, please visit http://www.panasonic.com/help
19
Making/Answering Calls
TG47xx(en-en)_1118_ver022.pdf 19 2011/11/18 10:26:17