Filter
Top Products
Answering system
Problem Cause/solution
The unit does not record new
m
essages.
R The answering system is turned off. Turn it on (page 24).
R The message memory is full. Erase unnecessary
messages (page 25).
R If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company,
not your telephone. Change the unit’s number of rings
setting or contact your service provider/telephone
company (page 28).
I cannot operate the answering
s
ystem remotely.
R The remote access code is not set. Set the remote
access code (page 26).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 26).
R The answering system is turned off. Turn it on (page 27).
Liquid damage
Problem Cause/solution
Liquid or other form of moisture
h
as entered the handset/base
unit.
R Disconnect the AC adaptor and telephone line cord from
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service center.
Caution:
R T
o avoid permanent damage, do not use a microwave oven to speed up the drying process.
36
For assistance, please visit http://www.panasonic.com/help
Useful Information
TG422x(en)_1130_ver021.pdf 36 2012/11/30 13:54:00