Filter
Top Products
9
Preparation
Battery installation
Important:
LWipe the battery ends (S, T) with a dry
cloth.
LInstall the batteries without touching the
battery ends (S, T) or the unit contacts.
Insert the batteries negative (T) terminal
first. Close the handset cover.
Note:
LUse only the included rechargeable
batteries (page 3, 4).
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before initial
use.
Battery strength
Panasonic Ni-MH battery performance
Note:
LIt is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
LActual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
LEven after the handset is fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
LThe battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and charge for at least 7
hours.
Battery icon Battery strength
054 Fully charged.
5 High
6 Medium
7 Low
074 Needs to be charged.
Operation Operating time
In continuous use Approx. 10
hours max.
In continuous standby
mode
Approx. 120
hours max.
TG1811_1812_1813AL(e-e).book Page 9 Friday, May 12, 2006 2:25 PM