Filter
Top Products
Handset Settings
30
Turning keytones on/off
Keytones are tones heard when keys are
pressed. Includes confirmation tones and
error tones.
1 Press {j/OK}.
2 Select “Handset Setup”, then press
{>}.
3 Select “Other Options”, then press
{>}.
4 Select “Keytones”, then press {>}.
5 Select “On” or “Off”, then press {>}.
6 Press {ih}.
Note:
L If keytones are turned off, error tones will
not sound when you enter the wrong PIN
or when memory is full.
Resetting the handset to its
default settings
1
Press {j/OK}.
2 Select “Handset Setup”, then press
{>}.
3 Select “Other Options”, then press
{>}.
4 Select “Reset Handset”, then press
{>}.
5 Enter “0000” (default handset PIN).
L If you changed the PIN, enter it (page
29).
6 Select “Yes”, then press {>}.
7 Press {ih}.
Note:
L The following items will be deleted or reset
to their default settings:
– Settings listed on page 25
– Redial list
– Voice enhancer
– Category names
– Category ringtones
L The following items will be retained:
– Handset phonebook entries (Category
names and ringtones will be reset to
their default settings.)
– Date and time
TG1223-1233BX(e-e).book Page 30 Wednesday, November 15, 2006 3:32 PM