Filter
Top Products
2.1 PT Programming
14 PT Programming Manual
2.1.2 Maximum Values
Throughout this manual, maximum entry values are shown for each programming item. When
maximum entry values for one or more of the supported PBX models differ, these differences are
listed within the programming item, as shown in the example below.
However, please note that extension number, slot and port entry values are not listed within each
programming item. These values vary depending on the model of PBX and the card type installed,
as shown below.
Extension Numbers (Including Feature Numbers)
• KX-TDA50/KX-TDA100/KX-TDA200: 1–4 digits
• KX-TDA600: 1–5 digits
KX-TDA50 Slot and Port Values
Available Slot Entry Values
[2XX] Timer Programming System timers
[3XX]
TRS/ARS Programming TRS and Automatic Route Selection
(ARS) programming
[4XX] CO Line Programming CO line and trunk group settings
[5XX] COS Programming Class of Service parameters
[6XX] Extension Programming Extension feature settings
[7XX]
Resource/Interface
Programming
PBX interface and external device
settings
[8XX]
SMDR & Maintenance
Programming
Station Message Detail Recording
(SMDR) and maintenance feature
settings
[9XX]
Card Programming Used to display the cards currently
installed in the PBX, or to "delete" a card
from system programming before
physically removing it.
Slot Number Supported Cards
01 Pre-installed Super Hybrid Ports
Programming
Number
Programming Group Title Description
These values vary by PBX model
[351]
Carrier Table No.
Trunk Group No.
END
ENTER ENTER
KX-TDA50: 01–10
KX-TDA100: 01–10
KX-TDA200: 01–10
KX-TDA600: 01–48
KX-TDA50: 01–64
KX-TDA100: 01–64
KX-TDA200: 01–64
KX-TDA600: 01–96
Disable/
Enable
SELECT