Filter
Top Products
13
3. Insert the wires coming from the door openers into
holes and tighten the screws.
Pass all the wires through the Holder.
Note
• Set the door opener paired with the doorphone.
• For wiring, UL 1015, AWG 22 twisted wire or the
equivalent is recommended.
• The wire should be between 1.2 mm and 2.4 mm
(3/64 inch and 3/32 inch) in diameter including
the coating.
To door opener 3
To door opener 4
Holder
To door opener 2
To door opener 1
D=1.2 mm-2.4 mm (3/64 inch-3/32 inch)
KX-TD161.book 13 ページ ２００１年８月２９日 水曜日 午後２時１５分