Filter
Top Products
75
Useful Information
Before Requesting Help
Answering System
Problem Possible cause Solution Page
The answering system is
on, but incoming messages
are not recorded.
•
The recording time is set
to “Greeting Only”.
•
Memory is full
(30 minutes or 64
messages).
•
Select “1 Minute” or “No
Limit”.
•
Erase some or all of the
messages.
p.61
p.65
Cannot operate the
answering system from a
touch tone phone.
•
Incorrect remote code
entered.
•
Tones are too short to
activate the unit.
•
The answering system is
off.
•
Enter the correct remote
code.
•
Press each button firmly.
•
Turn on the answering
system.
p.69
p.60, 68
Cannot operate the
answering system with the
handset.
•
Someone is operating
the answering system.
•
You are too far from the
base unit.
•
Retry when other user
has finished operation.
•
Move closer to the base
unit.
While recording a greeting
message, the unit starts to
ring and stops recording.
•
A call is being received.
•
To answer the call, press
TALK. The recording
stops halfway. Start from
the beginning after
hanging up.
During playback, the unit
starts to ring and stops
playback.
•
A call is being received.
•
To answer the call, press
TALK.
510NZ_e.book Page 75 Tuesday, July 15, 2003 1:32 PM