Filter
Top Products
34
Multi-unit User Operation
Handset Registration to a Base Unit
Handset Registration
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered. Additional KX-A145NZ handsets are available for
purchase separately. Up to 6 handsets can be registered to a single base unit. Using
additional handsets allows you to have an intercom call while simultaneously conducting
a call to an outside line.
Handset registration must be completed within 1 minute after pressing the
button. If over 1 minute, press then start over again.
Charge the optional handset batteries for 7 hours before initial use.
•
To exit the operation, press any time.
*1 The factory preset is 0000.
Search/Select desired
base unit number
available to register
the handset.
If all registered handsets start ringing (Paging),
press to stop paging then start over again.
When a handset is
registered successfully,
a confirmation tone
sounds and the
icon lights.
Press and hold on the Base Unit
(for about 5 seconds) until the green indicator flashes.
4-digit Base
Unit PIN after
"Enter Base PIN"
is displayed.*1
Press OK.
4
78
5
6
Press
RIGHT.
Press MENU.
Search/Select
"Registration".
Search/Select
"Setting
Handset".
12 3
"Register H/set"
450NZ_e.book Page 34 Monday, May 12, 2003 4:20 PM