Filter
Top Products
25
Cordless Telephone
Base Unit Settings
Changing Base Unit PIN
The factory preset is 0000. Once you have programmed the base unit PIN, you
cannot confirm it. We recommend you write down the base unit PIN. If you forget
it, please consult your nearest Panasonic Service Centre.
Call Restriction
You can restrict selected handset(s) from dialling selected phone numbers. You can
assign up to 10 call restriction numbers (up to 8 digits). If you dial a restricted number,
the call does not connect and restricted number flashes.
Cancelling Call Restricted Handset(s)
• To exit the operation, press any time.
*1 The factory preset is 0000.
*2 The selected handset number flashes.
*3 The selected handset(s) will stop flashing.
Before programming, please follow steps 1 to 2.
Press MENU. Search/Select
"SETTING BS".
"INPUT CODE"
12
Current 4-digit Base Unit PIN
New 4-digit Base Unit PIN
New 4-digit Base Unit PIN again to verify
5
3
6
45
4-digit Base
Unit PIN
*1
Select desired handset.*2
Handset Number
Phone Number
Press OFF.
To continue entering call
restriction numbers, repeat
the steps 7 to 8.
(up to 10 numbers)
OR
Press RIGHT.
Press RIGHT.
6
3
789
45 6
Enter phone
number to be
restricted.
(up to 8 digits)
4-digit Base
Unit PIN
*1
Handset
Number
Select desired
handset.*3
6
34 5 6 7
Press OFF.
Press RIGHT.
410_NZ_E_03.fm Page 25 Wednesday, April 23, 2003 12:02 PM