Filter
Top Products
26
Base Unit Settings
Automatic Route Selection
Automatic Route Selection is a feature which selects the least expensive carrier
(network) service available, when making long distance calls.
When area code(s) have been related to carrier codes, you will need only dial the area
code, the lower costing carrier (network) will automatically be dialled.
Please contact your telephone company regarding the carrier telephone charges.
Storing the Carrier Code(s)
Firstly you must subscribe to a second carrier (network) service. Then store the code as
follows:
Storing the Area Code(s)/Country Code
Store the area code(s) for which the chosen carrier (network) service charge rates are
lower than the original carrier (network) service. Up to 25 area codes can be stored.
If you do not store any area codes, all phone numbers will be dialled with the second
carrier code.
• To exit the operation, press any time.
*1 The factory preset is 0000.
*2 If you need more area code storing, repeat the steps from 6.
Before programming, please follow steps 1 to 2.
Press MENU. Search/Select
"SETTING BS".
"INPUT CODE"
12
4-digit
Base
Unit PIN
*1
2nd Carrier Code
On
Press OK.
1
Enter the carrier code.
(max. 7 digits)
9
3
1
5
46 7
4-digit
Base Unit
PIN
*1
Area Code
Press OK.*2
Press OK.
2
(max. 5 digits)
9
34 5 6 7 8
TCD410NL_E.book Page 26 Thursday, March 20, 2003 5:55 PM