Filter
Top Products
“
Using the Caller List
28
Storing Caller List Information in the
Directory
You can store numbers that are in the Caller List in the directory.
Make sure the handset is in the standby mode.
1
Lift the handset off the base unit and
press (›) or (‹) to enter the Caller List.
2
Press (›) or (‹) repeatedly to find the
caller you want to store in the directory.
Press FWD/EDIT (fl) (Yes key).
≥If the number requires editing, see page 27.
3
Press (›) or (‹) to select “Save
directory”. Press FWD/EDIT (fl) (Yes
key).
If there is no name information for the
caller, “Enter name” will be
displayed.
a) If a name is not required, press (›)
(Next key) and FWD/EDIT (fl) (Save
key).
b) If a name is required, enter the name
(p. 34). When finished, press (›)
(Next key) and FWD/EDIT (fl) (Save
key).
≥A beep sounds.
≥The display will return to step 2. You can
continue storing other items.
To return to the standby mode, press
(FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If the display shows “Directory full” in step 3, the display will return to
step 2. Press (FUNCTION/EXIT/CH) to exit the list. To erase other stored items
from the directory, see page 39.
≥You cannot store caller information in the directory if a phone number is not
displayed.
CINDY TURNER
1-234-456-7890
11:20A JAN.12 a3
Edit
1
Save directory
43
1
=Yes
10 new calls
43
1
=Directory
Enter name
21
4
=Next
Enter name
CINDY TURNER
21
4
=Next
CINDY TURNER
12344567890
1
=Save
1
Edit
Save directory
43
1
=Yes